HEATING ORDER
Keywords:
The bags shape according to harvest was defect (if defect can be corrected by re-stamping (when the seal is in a separate place). Of course, harvest was defect cracked, crack gone or cleaning in the form of, that is minimum at the level in size small when, such defects There is no possibility of correction, they are re-meltedAbstract
In some cases, there are situations in production where stamping technological process one or two simple from parts organization finds, but metal blanks high borderline to temperature is heated. Such In some cases, stamping is completed at temperatures much higher than the lower limit, in order to avoid the formation of a coarse-grained structure in the workpiece. A decrease in temperature at the end of deformation can cause the surface of the coating to become rough or crack. Grains shape and size according to harvest was defects thermal processing way with, for example, normalization or soften thermal processing to give can be solved using methods
Downloads
Published
2025-02-25
Issue
Section
Articles
